Wide view of the Margo Rubber Products production floor

SINCE 2005 · NASHIK, INDIA · ISO 9001:2015 CERTIFIED

Precision Rubber Components Manufactured in India, 95 Countries Served

Margo Rubber Products is an ISO 9001:2015 certified rubber component manufacturer in Nashik, India, moulding and extruding O-rings, oil seals, gaskets and bellows to customer drawing in eight compounds. Five million components a month, FOB Nhava Sheva. Quotation in 48 hours.

Request Engineering QuoteExplore Products
95
Countries Served
200+
Catalogue SKUs
5M
Components Per Month
ISO 9001:2015
Certified Quality

TWENTY-THREE NAMED ACCOUNTS ACROSS NINE SECTORS

EST. 2005 · NASHIK, INDIA
The Margo Rubber Products shop floor at Vilholi, Nashik

ISO 9001:2015

Certificate 09111526A, issued by Integral Certification Ltd, valid to 21 February 2027. Scope covers the manufacture of moulded rubber components; extension to the extruded and cellular lines is in hand.

OUR STORY

Rubber Component Manufacturing in Nashik Since 2005

Margo Rubber Products has manufactured precision rubber components in Nashik, Maharashtra since 2005. The works moved from a 6,000 sq ft plant running 200,000 parts a month to a purpose-built 10,000+ sq ft facility built around one linear flow — raw material in at one end, finished goods out at the other.

Compound formulation, mould tooling, moulding, finishing and testing all happen under that roof. When a part fails a fitment check there is no three-way argument between a compounder, a toolroom and a moulder — there is one team and one corrective action.

2005
Year Established
17.9M
Components Delivered Per Year
10+ yrs
Average Client Relationship
95%
Repeat Order Rate
Explore Our Capabilities

COMPETITIVE EDGE

Why Global OEMs Choose Margo Rubber Products

  • Certified to ISO 9001:2015

    Certificate 09111526A, audited annually. Batch traceability on compound, cure parameters and inspection results, retrievable per production batch.

  • Compound formulated in-house

    Eight polymer families mixed here, not bought in. If the part sits in hot oil we build for hot oil; the formulation is the engineering.

  • Quotation in 48 hours

    Quote and feasibility report inside two days. Prototype 48 to 72 hours from an approved drawing, fitment samples inside two weeks.

  • Tooling designed and cut here

    Mould and die development from a CAD file, a section drawing or a worn physical sample. No third-party toolroom in the loop.

  • Five million components a month

    Installed press and line capacity. Current output is 1.5 million, so a volume ramp gets press time rather than a queue position.

  • Export documentation as standard

    Certificate of Origin, ISPM-15 heat-treated pallets, APQP and PPAP packs where the programme requires them. FOB Nhava Sheva or CIF to your port.

OUR PORTFOLIO

Rubber Components Engineered for Every Application

Full Product Catalogue

SECTORS WE SERVE

Rubber Components for Nine Industries

HOW WE WORK

From Drawing to Delivery in Three to Four Weeks

Send a drawing, a specification or a worn part in an envelope. Quotation comes back in 48 hours, a prototype in 48 to 72 hours from approval, and production in three to four weeks — two on express.

  1. STEP 01

    Engineering brief

    Drawing, specification or physical sample in. We measure it, identify the compound family and confirm feasibility. Quote in 48 hours.

  2. STEP 02

    Compound selection

    Formulated against the duty cycle, not pulled off a shelf. Hot oil, ozone under static strain and thermal cycling each get a different mix.

  3. STEP 03

    Tooling & prototyping

    Mould or die designed and cut in-house. Prototype 48 to 72 hours from an approved drawing; fitment samples inside two weeks.

  4. STEP 04

    Production & in-process QC

    Automated presses with closed-loop temperature and pressure control. First-article dimensional check, then in-process inspection through the run.

  5. STEP 05

    Laboratory release

    Hardness to ASTM D2240, tensile to D412, compression set to D395, cure curve on the rheometer to ISO 6502-2. Every despatch lot.

  6. STEP 06

    Export & delivery

    HDPE bags, labelled cartons, ISPM-15 heat-treated pallets, Certificate of Origin. Nhava Sheva is 185 km and 3 h 20 by road.

Production bay with compression presses and stock material
Overhead gantry above the moulding bay

OUR FACILITY

Inside the Nashik Manufacturing Plant

A 10,000+ sq ft plant in the Nashik industrial belt, built for a single linear workflow: raw material in at one end, finished goods out at the other, with no cross-traffic between clean and flash-generating areas. Automating during the move took installed capacity to five million parts a month. Output today is 1.5 million.

  • Automated moulding presses — closed-loop temperature and pressure control, which takes operator variation out of the cure
  • IoT production monitoring — a slow press shows up the same day, not in the month-end report
  • Digital curing ovens — programmable controllers and a retrievable cure record per batch
  • In-house compound mixing — automated for even filler distribution, batch after batch
  • Testing laboratory — durometer, ODR rheometer, tensile machine, ageing oven, compression set rig, all on a calibration cycle
  • Centralised ERP and MES — planning, tracking and batch traceability across the plant
30%
Less production time per cycle since automation
20%
Better material utilisation
<1%
Target rejection rate
25×
Installed capacity against the old works

EXPORT MARKETS

95 Countries Served. Eighteen playbooks. Five live lanes.

Margo Rubber Products ships precision rubber components from Nashik, India to 95 countries, FOB Nhava Sheva or CIF to your port. Every market carries a country-level sourcing playbook — duty treatment, certificate requirements, transit time and port.

Export lanes from NASHIK, INSea lanes from NASHIK, IN to Australia, United Kingdom, United Arab Emirates, Malaysia.AUSTRALIAUNITED KINGDOMUNITED ARAB EMIRATESMALAYSIASAUDI ARABIANASHIK, IN

Incoterms FOB Nhava Sheva as standard; CIF, EXW and DAP by agreement at quotation stage. ISPM-15 heat-treated pallets on every consignment. See all 95 markets and their trade lanes

MATERIAL ENGINEERING

Eight compounds, mixed in-house. Published ranges, not sales copy.

Temperature service range per compound — the same table our engineers use for material selection, not a marketing simplification. Name the fluid, the temperature and the duty cycle and we will tell you which of the eight to specify.

Service temperature range of the eight compounds mixed in-house
CompoundService range on a scale of -60°C to 250°CService range

AEM

Signature compound, supplied to Mahindra & Mahindra

−40° to 175°Ccontinuous to 160°C

FKM

Aggressive chemical and hydrocarbon environments

−20° to 250°Ccontinuous to 200°C

Silicone

Widest service range; biocompatible grades available

−60° to 220°C

EPDM

Weather, ozone and steam resistant

−40° to 140°C

NBR

Oil and fuel resistant

−30° to 120°C

Neoprene

General purpose; flame-retardant grades

−40° to 120°C

SBR

Abrasion resistant

−30° to 100°C

Natural Rubber

High resilience, damping

−20° to 90°C

Shore A hardness to ASTM D2240 · tensile to D412 · compression set to D395 · ageing to D573 · cure curve to ISO 6502-2. Dimensional conformity to ISO 3302-1, classes M1–M4 moulded and E1–E3 extruded — tolerance follows the section.

GET IN TOUCH

Request an Engineering Quotation

Operators packing finished components for export dispatch

Send a drawing, a specification, or a worn part.

Our engineering team replies within one business day with a compound recommendation, an indicative price and a lead time. A full quotation and feasibility report follows inside 48 hours. No drawing? Send the part — a large share of our work starts as a worn component in an envelope.

48h
Quotation Turnaround
48–72h
Prototype From Approval
2 wks
Fitment Samples
3–4 wks
Production Lead Time
ATTACH DRAWING / SPEC (OPTIONAL)

Reply within one business day · info@margorubber.in · +91 96655 79276